Share:
Description
PSTC-16 Loop tack tester is used for adhesive, tapeand label in the measurement of their sticking force, adhesiveness and tack,etc.
It complies with the following testmethods
A strip sample of 25mm wide and 175mm longis formed into a loop and brought into contact with a glass plate at 300mm/min.Immediately after the contact, the loop is withdrawn at 300mm/min and themaximum force to separate the loop from the glass plate is recorded, which isreferred to as loop tack.
Technical Features
Parameters
PSTC-16 Loop tack tester is used for adhesive, tapeand label in the measurement of their sticking force, adhesiveness and tack,etc.
It complies with the following testmethods
- FINAT(FINAT Test Method No. 9:Loop tack measurement)
- PSTC-16 Loop tack
- ASTM D6195 standardtest methods for Loop Tack
A strip sample of 25mm wide and 175mm longis formed into a loop and brought into contact with a glass plate at 300mm/min.Immediately after the contact, the loop is withdrawn at 300mm/min and themaximum force to separate the loop from the glass plate is recorded, which isreferred to as loop tack.
Technical Features
- 7 inch TFT touch screenoperation (human machine interface)
- PLC control unit is equippedfor stable performance
- Precision ball screw foraccurate speed & displacement.
- Test speed is adjustable.
- Dual movement
- Limiting device and automaticreturning
- Microprinter
Parameters
- Test Range 200N ( or other range)
- Speed Range 1-500 mm/m
- Stroke 350mm
- Dimension (mm) 400(L)×340(W)×800(H)
- Sample Size 125mm*25mm
- Test Plate Size 150mm*25mm
- Power AC 220V 50Hz
Inquiry - PSTC-16 Loop tack tester Finat 9