COLO Automatic Powder Coating System
COLO-800D Automatic powder coating guns with control cabinet, COLO-200Dpowder painting reciprocator is your most budget-saving and efficient solution which meet the requirements of serial production in powder coating line, where reliability in automated operation, easy to handle operation and security are the most projecting advantages for the user.
Advantages
•Continuous and uniform powder coating, improve efficiency and application quality
•Reduce powder consumption, maximize utilization of painting materials
•Combined with booth and conveyor system, great performance in automatic production line
•The type and the number of installed control units could make as your requirements.
COLO-800D Automatic Powder Coating Unit
•The COLO-800D control based on COLO 10 years marketing experience, features reliable, low fault rate.
•The 100kv COLO-08 automatic spray gun maximizes transfer efficiency, saving your powder a lot.
•All settings for efficient powder coating are simple to operate, the controller permits 0-100kv voltage adjustable, powder output and automizing regulation
• The controller has three pre-setting application progames designed for beginners, quickly handling flat parts coating, complex parts coating and re-coating
Parameters
Power range |
100-240V |
Frequency |
50/60HZ |
Temperature range in use |
-10 +50 |
Gun weight: |
500g |
Rated output voltage |
24VDC |
Maximum output voltage |
0-100KV ( adjustable) |
Maximum powder injection |
600g/min |
Polarity |
negative (-) |
Maximum input-air pressure |
10kg/cm |
Optimum input-air pressure |
6kg/cm |
Maximum compressed-air consumption |
13.2 m3/h |
COLO-2000D Powder Coating Reciprocator
•Precise and gentle motion for speedy and uniform coating by frequency adjustable motor
•Quick job change pre-programmable preset settings for automatic selection of stroke and speed.
•Advanced digital controller is easy tocontrol speed and stroke length, and allows storeable programs
•Adjustable counterbalance weights allow perfectly balanced gun movement. Max. to carry 12 pcs spray guns.
Parameters
Power supply | AC 220V/110V 50Hz-60Hz |
Power motor | 0.75KW |
Sweep speed | 0-50m/min |
Acceleration | 1m/Second |
Environmental | 0-50 degree |
Star signal model | PLC with touch screen |
Max load capacity | 25kgs |
Motion range | 0.3-2.5m can be setting |
Point delay time | 0-5 sec (optional) |
Motor | Frequency adjustable |
Stroke | 1.5m/1.8m/2m/2.5m |
Inquiry - Automatic Reciprocating Powder Coating System