Share:
Gas/Diesel Fired Powder Coating Large Oven
This 5 meter powder coating oven has enough space to hold big batches of workparts, which is recommended to use natural gas, LPG or diesel as heating source that quickly gets to required temperature. Fully burning of fuels, our curing oven increases powder coating efficiency and saves energy expense.
COLO curing ovens are standardly equipped with loading frame and transportation trolley, which saves your efforts to operate especially for heavy workparts. Trolleys can be designed accoriding to your workparts as well as maximize the utilization of oven space.
Gas Powder Coating Oven Components
Heat Exchanger
Colo’s Heat Exchanger uses 310S stainless steel seamless pipe thickness of 3-4mm. it improves the temperature distribution and reduce the risk of failure. The air is distributed in advance specially calibrated mesh with both the walls and the floor.
Forced air
Forced air circulation and floor, we can boast a very good temperature uniformity result, our research has shown that the uniformity of air temperature in the furnace of our circuit does not exceed ±3°C! The result is due to our technology of horizontal, and vertical air circulation, the circulation is chosen according to the process.
Thick insulation 100-150mm
Our walls are built with 1.5mm panels filled with 100-150mm thickness rock wool insulation, which helps keep the heat in the powder coating oven and out of your work area. .
Simple PLC Control
Control provides high precision heating process, it offers all the features you need. The LED display allows you to set the temperature, as well as the duration of heating process at the desired temperature.
RIELLO Burner
Export into worldwide Italy imported burner. The high performance burner takes full utilization of burning fuels, energy-saving.
Standard Model COLO-5219 Powder Coating Oven Specifications
| Worksize dimensions | 1900 width x 1900 height x 5000 depth mm |
| Overall dimensions | 2100 width x 2480 height x 5200 depth mm |
| Power supply | Gas/LPG/Diesel |
| Voltage/Frequency | 380V/220v(50-60hz) |
| Warm-up time | 15-30 min. (180° C) |
| Temperature stability | < ± 3-6°C |
| Temperature max. | 250° C |
| Ventilation performance | 8288-16576m3/h |
| Motor power | 5.5kw |
| Circulation/ Air flow | Two stage fire, Italy Riello, 20,0000cal |
| Transportation | two Trolleys |
| Warranty |
12 months |
We supply standard modes of powder coating oven with lower cost, also provide custom services, oven sizes and configurations can be designed as your precise requirements.
Inquiry - Gas/Diesel Powder Coating Large Oven
