Ultrasonic Flaw Detector

 Weld inspection in the power gener- Ation and petrochemical industries

 Flaw location with display of all coordinates,sound path,(reduced) surface distance,depth position and leg number

  Display of every sound beam reflection (number of half skip distances or legs) and identification of

 leg color on the "live“ A-scan

  New powerful DAC/TCG with JIS DAC Module according to JIS Z 3060-2002

 Amplitude evaluation in dB refering to a previously  recorded reference dcho or according to AWS D1.1

Precise thickness measurement for the automobile industry

You can measure the sound path difference precisely at the peaks of an echo sequence with a resolution of 0.01mm/

DGS evaluation with direct digital ERS readout

 Inspection of forgings in the power generation and aerospace sectors;

The automatic setting of the pulse repetition frequency from 20Hz to 1kHz h

Eliminates phantom echoes while inspecting fine grain and large work pieces.

Defects from an equivalent reflector size 0.3mm onwards will be detected

Inspection of special materials in the aerospace and automobile industry 

Corrosion wall thickness in the power generationand petroch emical sectors 

During wall thickness measurement on corroded parts using dual element probes,you simultaneously check the reading together with the A-scan,thus rece-iving the maximum reliability for the measurement.On hot surfaces you use the auto-freeze function,minimi-zing the probe`s contact time.The minimum capture mode gives you the thinnest measured reading at the end of a continuous scan

Harsh field and industrial environments 

 • Extended temperature range from 0℃ to 60℃     

 • Weight only 2.0 kg                                         

 • Extended bettery life to 8 hours under real test conditions

Fast and bright color screen

Color brings you many additional benefits in your daily inspection job:

 • Color display of monitor gates and curves (DAC,TCG,DGS) for direct recognition

 • Color coded display of angle beam inspection of welds

                                                        Color-coded display of legs in tests using angle-beam probes 

• Use of color to display references (A-scan) toMake comparisions easy

• Multicolor screen combinations for operator per-ferences and to select best suitable color scheme   according

to the working environment

                                                                                  A-scan companision

• Colorized envelope curve display for echodynamic analysis

                                                                                        Envelope curve

  Square Wave Pulser (option) 

  Selectable and tunable for optimum probe matching to satisfy a wide range of tough-to-penetrate applications.               

   For low frequencies,square wave pulsers allow optimum probe matching by adjusting pulse width and voltage.

Difficult to penetrate metallic applications and especially non-metals inspection like composite materials are

optimized.

• Pulse width is tunable up to 1000ns in 10ns steps for optimum probe matching and versatility in meeting a wide

range of appli-cations.

• Pulser voltage is adjustable from 25 to 500V in 10V steps.

DAC Functions 

  Recording reference echoes in DAC mode will be simplified by automatic gain adjustment.The echo to be recorded will be set automatically at 80% and stored the dB-difference to the first reference echo can be displayed,if needed.The new JIS-

DAC meets the latest JIS Z3060-2002 specifications.

                                                                 New DAC function according to zhe latest JIS Z3060-2002

Three different time of flight measured ments 

Depending an the time of flight mode selected,the distances and amplitudes will be measured and displayde for

the echo in each gate.

                                                                 Peak:sound path and anplitude at the highest echo in the gate

     Curved surface correction 

Corrects sound path information when using an angle beam transducer to circumferentially inspect a curvedsurface

for either trbular or bar inspections.

Data reporting 

200 datasets enable a great number of calibration settings and test results to be stored.Also extended

up to 1200 documented with a memo field containing 9 added information for memory and analysis.The re-Port

or setting can be uploaded to a computer using.

Flank:sound path at the intersection of the first echo with the gate threshold;amplitude at the highest echo in

     the gate

     Fank:sound path at the intersection of the first echo with the gate threshold;amplitude at the highest echo in

   the gate.

   Curved surface correction

   Corrects sound path information when using an angle beam transducer to circumferentially inspect

   a curved surface for either tubular or bar inspections.

   Data reporting

   900 datasets enable a great number of calibration settings and test results to be stored. Also

Extended up to 1900 datasets. Each report can be documented with a memo field containing 9 added information for memory and analysis . The report or setting can be uploaded to a computer using an RS-232 or USB (with USB-RS accessory) for saving, reviewing or printing.

   Measure readings 

   Up to 20 measure readings are selected to be displayed on the screen,measure can be carried out instantaneous

   or behind freeze.

   Other benefits 

   We have also implemented innovations from the computer industry in the battery concept to make your daily

   work easier: the rechargeable lithium-ion battery pack enables you to carry out your inspec-tions for at least 8

   hours.Charging is easily carried our internally within the instrument just by connect-ing the power adapter to

   the detector.